Charecteristics:
1、Faster process speed
2、Stabilization of capability
3、Widely application ,suti to mark for almost all kinds of non
metal materials
4、Mark deepness can be controled by machine, through control the
power of laser exportation, control the deepness of marking,
realize surface inject process
5、This machine also can realize deep engraving and cutting, maximum
enrich machining expressive force of machine.
6、Fully edit functions, easier operation and control software,
friendly interface of software, can mark series
numbers,dates,time,barcodes,etc;no limit marking of number and
rows.
7、Small volume, easier and simply installation.
8、Suit to match with production line of automatization.
9、Standard power and electric demand,220V/380V/110V is available.
10、We can install minitype worktable or bracket,try to satisfy to
customer’s operation enviroment.
11、Non touch process, protection of environment, no pollution.
12、Control by computer, easy to operate, support all kinds of
images and letters, match with autocoding , pass by signal of coder
to laser, mark all letter,date,figure,image,series number,barcode
to materials, quite easy.
13、Power of machine is only 500W,lower operation cost, fast marking
speed, lower energy consume, without further expense.
14、Adopt industrial computer, strong capability of anti-jamming,
bigger storage, full sides put in/put out interface.
Application scope:
Widely apply to electron, craftwork, plastic,have characters which
were suit to moden production line.
Suit to mark trademark ,type on porcelain capacitance,IC card,etc.
mark quality is good, clear marking, never abrasion,strong effect
of anti-fake.
Match with automatical feeder , realize consummate solution of
ulk,sack work piece.
Application Industry:
Widely appilication in packaging of food, medicament, beverage,
PCB, electrician material, board industry, wire industry, electrica
compents ,etc.
Technical parameter:
Model:
CX-PM1
Laser
type:
Metal RF CO2 laser
Laser power:
10W/30W
Laser wavelength: 10.6um
Line
width:
0.02mm
Depth:
0.4mm
Cooling system: Air
cooler/water cooler
Marking range: Static
state:110*110mm(standard),70*70(choose)
Dynamic: the height of 70mm or 110mm free for input, no limit
number of rows. Date input automatically along with time’s change,
block number and series number also change automatically.
Message input: Input by
USB,internet etc.
Interface:
Internet, USB,RS232, Multiple user-defined I/O.
Focus:
70mm(Standard), 150mm and 250mm(Optional)
Speed of pipelining: 55m/min, 126m/min
Protection:
Obturated light routh of main frame, non effected by power and
dust.
Environment: 5-50℃
humidity:≤95% non coagulation
Power supply:
AC220V 50Hz
Whole power:
500W,1500W
Optional fittings: synchronous device,
photoelectric sensor, smoke eject system,protect cover of laser
head, laser source bracket, transmission strap
